Memoria Kingston Kvr Ddr4 8GB 3200Mhz C22

description specifications
kvr32n22s6/8
8gb 1rx16 1g x 64-bit pc4-3200
cl22 288-pin dimm
continued >>
features
this document describes valueram's kvr32n22s6/8 is a 1g x
64-bit (8gb) ddr4-3200 cl22 sdram (synchronous dram),
1rx16, memory module, based on four 1g x 16-bit fbga
components. the spd is programmed to jedec standard
latency ddr4-3200 timing of 22-22-22 at 1.2v. each 288-pin
dimm uses gold contact fingers. the electrical and mechanical
specifications are as follows:
cl(idd)
row cycle time (trcmin)
refresh to active/refresh
command time (trfcmin)
row active time (trasmin)
ul rating
operating temperature
storage temperature
22 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 v - 0
0o
c to +85o
c
-55o
c to +100o
c
• power supply: vdd = 1.2v typical
• vddq = 1.2v typical
• vpp = 2.5v typical
• vddspd = 2.2v to 3.6v
• nominal and dynamic on-die termination (odt) for
data, strobe, and mask signals
• low-power auto self refresh (lpasr)
• data bus inversion (dbi) for data bus
• on-die vrefdq generation and calibration
• single-rank
• on-board i2 serial presence-detect (spd) eeprom
• 8 internal banks; 2 groups of 4 banks each
• fixed burst chop (bc) of 4 and burst length (bl) of 8
via the mode register set (mrs)
• selectable bc4 or bl8 on-the-fly (otf)
• fly-by topology
• terminated control command and address bus
• pcb: height 1.23” (31.25mm)
• rohs compliant and halogen-free