markvision's memory module is organized 64 bits in a 288 pin memory module, based on 8bit ddr4 fbga components per module.
the l o-dimm is intended for use in applications operating up to 1333mhz clock speeds and achieves high-speed data transfer rates of up to 2666mhz.
288-pin, socket type small outline dual in line memory module (lo-dimm)
fast data transfer rates: 2666mhz
vdd = 1.2v (typical)
vpp = 2.5v (typical)
vddspd = 2.2–3.6v
nominal and dynamic on-die termination (odt) for data, strobe, and mask signals
low-power auto self refresh (lpasr)
data bus inversion (dbi) for data bus
on-die vrefdqgeneration and calibration
single-rank
on-board serial presence-detect (spd) eeprom
16 internal banks; 4 groups of 4 banks each
fixed burst chop (bc) of 4 and burst length (bl) of 8 via the mode register set (mrs)
selectable bc4 or bl8 on-the-fly (otf)
gold edge contacts
halogen-free
fly-by topology
terminated control, command, and address bus
operating temperature – commercial (0°c = toper = +85°c)
package 288-pin dimm (halogen-free)
frequency/cas latency 2666mhz @ cl=19
