markvision's memorym module is organized as 1024m x 64 bits in a 288 pin memory module, based on eight 1024mx8 bit ddr4 fbga components per module.
the lo-dimm is intended for use in applications operating up to 1600mhz clock speeds and achieves high-speed data transfer rates of up to 3200mhz
288-pin, small-outline dual in-line memory module (lodimm)
fast data transfer rates:
8 gb (1024meg x 64)
vdd = 1.35v
vpp = 2.5v (typical)
vddspd = 2.2–3.6v
nominal and dynamic on-die termination (odt) for data, strobe, and mask signals
low-power auto self refresh (lpasr)
data bus inversion (dbi) for data bus
on-die vrefdqgeneration and calibration
dual-rank
on-board serial presence-detect (spd) eeprom
16 internal banks; 4 groups of 4 banks each
fixed burst chop (bc) of 4 and burst length (bl) of 8 via the mode register set (mrs)
selectable bc4 or bl8 on-the-fly (otf)
gold edge contacts
halogen-free
fly-by topology
operating temperatura commercial (0°c = toper = +85°c)
package 288-pin dimm (halogen-free)
frequency/cas latency x x
density organization jedec speed bin package
8gb 1024m × 8 3200mhz (16-18-18-39)
288 pin lo-dimm
3200mhz @ cl=16
